This video shows how to use NuFACE Trinity ELE attachment, and the different positions to use it in.
Follow along with these instructions to learn how you can use the NuFACE Trinity ELE, an FDA-cleared microcurrent treatment attachment for the NuFACE Trinity that targets hard-to-reach eyebrow furrows, crow’s feet and smile lines.
Before you begin, firmly press the attachment release button on your NuFACE Trinity device to remove the Facial Trainer and firmly press the button again to attach the ELE.
Step 1: Prep
Cleanse the skin with an oil-free cleanser, removing any makeup, oils and impurities and apply the NuFACE Gel Primer to the left mouth area. Apply the gel in a mask-like layer so that the skin appears wet. Press the on/off button to power on the ELE. Press the intensity control button until you reach the maximum level. The intensity can be adjusted for comfort at any time.
Step 2: Lift
Beginning with the lower lip, place both spheres on position one and lift and hold until the beep sounds. You will hear the audible treatment timer beep every five seconds. Move to position two and lift. Return to position one and repeat the sequence two more times.
Moving to the upper lip, place both spheres on position one and lift and hold until the beep sounds. Move to position two and lift. Return to position one and repeat the sequence two more times.
Moving to the smile lines, place both spheres on position one and lift and hold until the beep sounds. Move to position two and lift. Return to position one and repeat the sequence two more times.
Apply the gel to the left eye area to continue the treatment. Beginning with the lower eye, place both spheres on position one and glide to the inner corner until the beep sounds. Move to position two and glide. Move to position three and glide. Return to position one and repeat the sequence two more times.
Moving to the upper eye, place both spheres on position one and glide to the inner corner until the beep sounds. Move to position two and glide. Move to position three and glide. Return to position one and repeat the sequence two more times.
Moving to the brow, place both spheres on position one and lift and hold until the beep sounds. Move to position two and lift. Move to position three and lift. Return to position one and repeat the sequence two more times.
Moving to the eyebrow furrows, place both spheres on position one and slowly glide halfway to the hairline until the beep sounds. Repeat the glide two more times.
Now apply the Gel Primer to the other side of the face and continue the treatment.
Step 3: Finish
Power off the device and place on the charging cradle after every treatment. Remove the Gel Primer with a damp cloth and apply your favorite NuFACE serum or continue with your normal skin care routine.
Use on areas of concern: three minutes for the lips and five minutes for the eyes. Use on eye and lip areas five times a week for the first 60 days. After 60 days, use two to three times a week to maintain the results.
Mon - Fri | 9 - 5 p.m. CT |
Sat (chat only) | 9 - 3 p.m. CT |
Sun / Holidays | Closed |
Call or Text: | 402-697-1100 |
Comments